BFF AcademyPro tier

Pro course

Quick start: Your first client session 10m

At a glance Setting the app up the way you work Adding custom data and templates Creating the rider and bike profiles Setting up the space and the session Recording Reading the first result Adjusting and checking as you go Recording again Final measurements and reports Closing the session Where to go next

1 What Pro is for, and how this track works Coming soon

At a glance

What this track assumes you already know

What the app sees that your eye cannot

The three units, and why the order matters

What this track does not cover

Working through these lessons with the app open

2 Setting up a session before the first recording Coming soon

At a glance

What the app wants to know before you record

The rider record, the bike record, and the session objective

Custom data: capturing what your practice actually asks

Which intake answers change how you read the numbers later

What the app cannot see, and why the interview still matters

3 Discipline settings and what they change Coming soon

At a glance

How the app switches targets by bike type

Road as the baseline

Mountain: what shifts, and what the app expects

Time trial and triathlon: the aero measurement set

Choosing the setting, and everything downstream that follows from it

4 Riders, bikes, and sessions: running a book of clients Coming soon

At a glance

The data model, and why it is built this way

Setting up a rider and their bikes

Session status and how work moves through your shop

Custom data: capturing what your practice actually cares about

Search, filter, and finding a fit from two years ago

Storage, sync, and not losing a client's history

5 Turning a complaint into a measurement Coming soon

At a glance

Mapping what the rider reports onto what the app measures

Which readouts to open first, by symptom

When every number is in range and the rider still hurts

Documenting a symptom against a session

When to stop fitting and refer out

6 Asymmetry in the app's readouts Coming soon

At a glance

Where a left-right difference actually surfaces

What the rear view measures on each side

Telling a real difference from a tracking artifact

Recording a correction so the next session starts from it

What the app will not tell you about cause

7 Rear view: PSIS, pelvic angle, and upper body balance Coming soon

At a glance

Setting up a rear-view recording

What PSIS tracking measures, and why that landmark

How pelvic angle and upper body balance are derived

Reading left against right

The crank-length assumption on rear-view distances

8 LiveCheck Coming soon

At a glance

What LiveCheck computes, and what it skips to stay live

Setting up for a live check

A quick look between adjustments

How a live number differs from a recorded one

When to stop watching the screen

9 When tracking fails Coming soon

At a glance

What the tracker is doing frame to frame

Recognizing a bad track before you use its numbers

Marker override: what changes in the pipeline

The BDC switch: which point in the stroke the app reads

Deciding to re-record instead

10 Crank length simulation Coming soon

At a glance

Why crank length sits in the calibration, not just the geometry

What the toe contact point adds to Explore

Running a crank-length what-if

What the app recalculates downstream, and what it leaves alone

Making the recommendation

11 The pedal interface, as the app reads it Coming soon

At a glance

What the app measures at the foot, and where in the stroke

Foot angle across the three crank positions

Reading toe tracking from the front view

Checking a cleat change in the app rather than by eye

What the app cannot see about the shoe

12 Saddle and cockpit changes, and what moves on screen Coming soon

At a glance

Which measurements move when you move the saddle

The two axes setback is read against

What changes on screen when you tilt the saddle

Reach and drop as the app reports them

Testing a stem change in Explore before the client buys one

13 Where our numbers come from Coming soon

At a glance

Why a fitter should ask this question

Established references, and what they publish

What we did with our own data

Why the app shows a band rather than a number

What we have not done, and will not claim

Answering a client who asks whether the app is accurate

14 The handoff: what the app gives the client Coming soon

At a glance

What the app can produce for a client, and in what formats

Comparison reports: choosing the two recordings

Section selection and branding the output as your own

Explaining a readout to someone who has never seen one

What to tell them about the first two weeks

Setting the follow-up session up now, so it compares cleanly

Where to go next

Tell us how it went

Reference

Getting around Pro Coming soon

At a glance

The rider-centric home

Inside a rider

Inside a session

The view modes

Where the tools live

Troubleshooting Pro Coming soon

At a glance

Inconsistent results

Side-view tracking problems

Front-view tracking problems

Rear-view tracking

LiveCheck problems

Remote Camera problems

Import and export

Reports, templates, and branding

Sync and storage

Subscriptions and activation

Still stuck

Pro features from start to finish Coming soon

At a glance

Search the course

Quick start: Your first client session

about 10 minutes Section 2 of 12

Setting the app up the way you work

Start in Pro Settings in the menu on the main screen.

Setting	What it's for
Pro Info	All reports feature your branding: name, address, email, phone, logo, etc on your reports
Measurement Ranges	Customize the target ranges for any angle on any bike type
Report Options	What content shows up in your PDF reports
Video Report Options	What content shows up in your video reports

You can fill out the first two now. Finish the Quick Start to understand more about the features on the reports before customizing.

Was this section helpful?