BFF Academy · Pro course Pro course

Setting up BFF Pro

about 15 minutes Lesson 1 of 14 Section 5 of 7

Adding a bike

Add the bike from the rider's main page. Tap + Add Bike below the rider info. A bike belongs to one rider and keeps its own record, so every session on it starts from the same details. Bike Measurements (images you can take of the before and after setups) come later in the course.

Bike Info is where you choose the bike type. This page holds info about the bike, frame, handlebars, stem, pedals, and shoes the rider uses. Just like in the rider profile, you can add your own custom data to these fields too. You can also add your own bike types to the list (these will use the Fitting ranges you can set in Pro Settings).

Set the bike type before you record. The app's ranges follow it (Bike type and measurement ranges).

The crank arm is the ruler. To get the most accurate distances, the app needs one length it already knows: the crank arm. It uses the crank length to work out how big everything else is. You can set its length in Bike Info under Frame Info. Any session linked to that bike will use that length. The app defaults to 172.5 mm to provide a starting point, so check it before the first recording.

Note: The crank length only changes distances and not angles.

Changed crank length in Bike Info after you already recorded? New recordings use the new length, but recordings you've already made keep their old distances until you reanalyze each one. Open the video, then ··· → Analysis → or:

  • Reanalyze (Quick): It's faster because it skips frames through most of the pedal stroke and checks every frame only around the bottom.
  • Reanalyze (Precise): It checks every frame with all three tracking models, so it takes longer but is less likely to lose a point.

On a front or rear recording, it's a single Reanalyze.

Was this section helpful?
Tell us more