Troubleshooting Pro
Front-view tracking problems
The rider's right knee appears on the left of the screen. Is that right?
Correct. The camera faces the rider, so it sees them the way someone standing in front of them would: the rider's right is on the left of the screen. The rear view, filmed from behind, keeps the rider's right on the right. Read results by the rider's body, not by the side of the screen.
Why does Toe Tracking read Poor?
This is almost always the capture, not the rider: the camera isn't level or centered, it moved during the recording, the light is poor, or something is blocking the view of the feet. Toe Tracking is the quality check for the whole front recording, so when it reads Poor, treat the other front measurements as suspect. Put the device on a tripod, centered in front of the bike and level, and record again.
How can Toe Tracking get past Acceptable?
A longer recording gives it more pedal strokes to work with. On the recording screen, tap ··· → Max Duration and choose 5, 10, or 15 seconds.
Why does Knee Tracking read Unstable?
Check Toe Tracking first. When the toe can't be tracked well, the knee's path can't be worked out reliably either, so fixing the toe usually fixes the knee.
Why is front-view Knee Angle only a few degrees?
On a front recording, the Knee Angle shown in the Video view is how far the knee tilts from vertical, not the knee bend seen from the side. A few degrees either way is expected.
Why is there no Classic Dashboard for the front view?
Classic Dashboard is for side recordings only. Front-view analysis is in the EZ Dashboard's three modes (Knee Tilt, Knee Tracking, and Toe Tracking) and in the Video view.
Why do Knee Tilt and Knee Tracking disagree?
They look at the same knee in two different ways. Knee Tilt compares the top and the bottom of the stroke; Knee Tracking follows the whole stroke. They usually agree, and when they don't, both are worth a look.