Getting around Elite
The Classic Dashboard
The Classic Dashboard is on side recordings only. Tap the button at the top left and choose it; the button then reads Dash. Each measurement that's switched on is drawn on you, with its value and a colored bar.
| # | Part | What it does |
|---|---|---|
| 1 | Menu icon (the ···, top right) |
The video menu. See The video menu. |
| 2 | Dash (top left) | The view button. Tap it to switch views. See The four view modes. |
| 3 | Measurement box | One for each measurement that's switched on, with its name and value. |
| 4 | Colored bar | Green is inside the range, yellow is close to the edge, and red is outside it. The small triangle is you. The ranges are set for your bike type. Our ranges draw on established fitting references and our own fitting data. |
| 5 | Drawn on you | The lines and points each measurement is taken from. Angles are shaded. |
| 6 | PEDAL buttons (bottom left) | Choose a point in the pedal stroke: the top, 3 o'clock, or MKE (maximum knee extension). |
| 7 | MEASUREMENTS list | Choose what's drawn. A checkmark means that measurement is drawn on the picture. Tap a row to switch it on or off. If two boxes overlap, switch one of them off. Each pedal position keeps its own settings. |
Remove Background: With iOS 17 or later, a round button at the bottom right of the picture removes the background, so you and the bike stand out. It's grey when off and blue when on, and each recording keeps its own setting.
Was this section helpful?Tell us more