BFF Academy · Elite course Elite course

Saddle height

about 12 minutes Lesson 2 of 7 Section 8 of 9

Making the change

Before you move anything, mark where it started. Take a photo, measure your saddle height, or note the mark on your seatpost if it has one. If the change doesn't feel right, you can go straight back.

Lesson 6, Measuring your bike, covers a full record of your bike.

  1. Loosen the seatpost clamp at the top of the seat tube (the bolt holding the post, not the one holding the saddle to the post).
  2. Slide the post up or down. You don't have to move the whole suggested distance at once; a smaller step is fine.
  3. Retighten it to the torque in your bike's manual. Many parts have it printed right next to the bolt.

Note: The clamp sits in different places on different bikes. If you can't find yours, check your bike's manual or the manufacturer's website.

Then record again before you change anything else. Your fore/aft reading assumes the new height, so read it on the new recording.

Name the new recording and note what you changed. On your own recording:

  1. In the Session, open the recording you took after the change.
  2. Tap its name at the top of the screen.
  3. Type a name, like Saddle Raised, and what you changed under Notes, then tap Done.
Was this section helpful?
Tell us more