How to record well
The recording sequence
Once you tap the record button, the app goes through three phases. You actively control only the first.
- Delay. The app gives you a moment to settle into a steady cadence before beginning the recording. The app defaults to 10 pedal strokes, but you can change the number of strokes or choose a timer countdown in seconds instead. Give yourself enough time or pedal strokes to get to your normal pedaling rhythm. The app counts your strokes or last few seconds with audible timing beeps, one beep per stroke. Note: on pedal strokes, no beeps means it isn't seeing your pedaling, so check that your foot is visible.
- Recording. After the count-in, the 3.5-second capture starts. Pedal steadily through the whole 3.5 seconds, including through the end sound, four ascending tones.
- Analysis. Automatic. Your analysis page pops up right after, and your new recording will now appear in your session.
Cadence: Pedal at your normal cruising cadence (about 80 to 90 rpm). The point is to capture how you actually ride.
Hear the beeps for yourself:
Can't hear the beeps? The flash on the back of your phone gives the same cues visually: it blinks once per pedal stroke while the app counts you in, stays lit while the 3.5-second recording runs, and goes dark when the capture is done.
Too loud? The beeps play even when your phone is on silent. Turn your phone's volume down instead.
Was this section helpful?Tell us more